High Quality Heavy Equipment Air Filter Element Loader Air Filter Mining Machinery Filter Element

High Quality Heavy Equipment Air Filter Element Loader Air Filter Mining Machinery Filter Element

The function of the air filter is to provide clean air for the work of the automobile engine, and prevent the intake of air with foreign particles in the work to increase abrasion and damage the engine.
How often should the air filter be replaced? On the question of when to replace the air filter, different brands and types may receive different answers. Some people suggest that the air filter should be replaced every 10000 km, while others suggest that it should be replaced every 20000 km. In fact, the replacement of the air filter element depends on the actual situation. For example, in some areas, there is a lot of sand and dust. It is recommended that the owner should check the air filter during each maintenance, shorten the replacement cycle, and replace it once for the first time when necessary. In some cities with relatively clean air, the replacement cycle can be appropriately extended.
When checking the air filter, many car owners will blow it with air or "play it" outside when they find that the air filter is dirty. Is it reliable? Generally, air filters have many wrinkles, which are used to increase the air contact area and increase the filtering effect without affecting the engine intake. So a lot of fine dust is firmly attached to the surface of the filter element, which cannot be blown off. At most, it can only remove the dust on the surface, which is of little significance. These fine dust will still adhere to the surface. Note: Do not blow hard with air. It is easy to blow dust into the air filter element, which makes the hole diameter of the air filter element larger and the filtering effect drops sharply. At this time, many fine particles of dust cannot be filtered clean. It is easy to enter the engine through the air filter element during driving.
What should I do if there is water in the air filter? Generally, the water in the air filter indies that the engine may have water ingress. This is often seen in summer when wading. In this case, it is recommended to turn off the engine first to avoid water ingress and cylinder jacking! As a normal practice, push out the vehicle, open the air filter housing, and clean the water (check whether there is water in the cylinder). It is better to find a regular repair shop for simple cleaning, and then it is recommended to replace the air filter with water.
Summarize the replacement cycle of the air filter, as long as you remember "replace according to the environment, replace as needed". If the owner has requirements for the performance of the vehicle, it is also recommended to shorten the replacement cycle.

The air filtration technology mainly adopts the filtration and separation method: by setting filters with different performance, the suspended dust particles and microorganisms in the air are removed, that is, the dust particles are trapped by the filter material to ensure the cleanliness requirements of the air volume. The filter material used is a fiber with a relatively fine diameter, which can not only make the air flow pass smoothly, but also effectively capture dust particles.
2. The dust filtered by the clean technology is generally 0.1-10 μ The dust particles of m are small, including solid particles and liquid particles; Organic particles suspended in the atmosphere include microorganisms, plant pollen, kins and hairs. Microbes generally include viruses, rickettsia, bacteria, fungi, protozoa and algae. The air purifiion is mainly controlled by bacteria, fungi and viruses. Because microorganisms are mainly attached to dust particles, effectively controlling dust particles in the air can effectively control bacteria, fungi and viruses in the air. To achieve this, it is necessary to filter through a particulate filter of barrier nature. In general, the filtration efficiency of ordinary high efficiency filters for bacteria can reach 99.996%, which can basically meet the filtration and purifiion requirements of biological clean rooms..
The filter layer of the filter has five main functions in ching particles:
Interception effect: when a particle of a certain size moves near the fiber surface, and the distance between the centerline and the fiber surface is less than the particle radius, the dust particles will be intercepted by the filter material fiber and deposited.
2. Inertia effect: when the particle mass is large or the speed is large, it will be deposited on the fiber surface due to the impact of inertia.
3. Diffusion effect: particles with small particle size have strong Brownian motion and are easy to collide with the fiber surface.
4. Gravity effect: When particles pass through the fiber layer, they are deposited on the fiber due to gravity sedimentation.
5. Electrostatic effect: fibers or particles may be charged to produce electrostatic effects that attract particles, which will attract particles to the fiber surface. It's hard to find the picture. I'll fight for it.

The air filter element is a filter, also called air filter, air filter, style, etc. It is mainly used for air filtration in engineering locomotive, car, agricultural locomotive, laboratory, sterile operation room and various precision operation rooms.

During the working process, the engine should be suck into a large amount of air. If the air is not filtered, the dust suspended dust in the air is inhaled into the cylinder, and the wear of the piston group and the cylinder will be accelerated. Between the large particles entering the piston and the cylinder, it will cause a serious "pull cylinder" phenomenon, which is particularly serious in the dry and sandy working environment. The air filter is installed in front of the carburetor or the intake pipe, which plays the role of filtering the dust and sand particles in the air to ensure that the amount of air enters a sufficient amount of air in the cylinder.

FAQ

1. who are we?
We are based in Hebei, China, start from 2012,sell to Domestic Market(40.00%),Africa(20.00%),North America(10.00%),Eastern Europe(10.00%),South America(8.00%),Southeast Asia(7.00%),Eastern Asia(3.00%),Western Europe(2.00%). There are total about 25 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Filter element,Hydraulic filter,Dust removal equipment,Dust filter,Dust filter cartridge

4. why should you buy from us not from other suppliers?
Our company produces various filter elements, filter cartridges and filters for machinery, ships, steel plants, power plants, compressors, air compressors, dust treatment, etc., and can be customized according to customer requirements.

5. what services can we provide?

We have a complete range of products and can provide you with the filters you need, and can be customized according to your requirements.

Our factory

Appliion field
1. In the machine tool industry, 85%of the machine tool transmission system uses hydraulic transmission and control. Such as grinding machines, milling machines, planes, pulled beds, pressure machines, cutting beds, and combined machine tools.

2. In the metallurgical industry, the control system of the electric furnace control system, the control system of the steel rolling machine, the flat furnace installation, the turntable control, the blast furnace control, the band bias and the constant tension device all use hydraulic technology.

3. In engineering machinery, hydraulic transmission is generally used, such as excavators, tire loaders, car cranes, crawler bulldozers, tires, and self -propelled tires, flat -ground machines and vibration rollers.

4. In agricultural machinery, hydraulic technology is also widely used, such as joint harvesters, tractors and plows.

5. In the automotive industry, hydraulic off -road vehicles, hydraulic downturn cars, hydraulic high -altitude operating vehicles and fire trucks all use hydraulic technology.

6. In the light textile industry, hydraulic technology uses plastic injection molding machines, rubber sulfids, papermaking machines, printing machines and textile machines.

Packing and shipping

Means of transaction